Vintage Honda Acty 4WD – TC-1231322 w/ ~40k miles / 64,080 kilometers. 5-speed manual transmission. – cool vintage look and lots of utility in a compact package.
For arrival Spring, 2022.
Available for pre-purchase as a right of first refusal. 50% down holds it until arrival. If happy, then balance (WA residents plus tax and license) due upon delivery. If not satisfied for any reason, deposit is 100% refundable.
More info from Wikipedia – the Acty range is designed to be economical, agile work vehicles, and generally lack luxury options, although air conditioning and power steering are available along with various trim, decoration, and customization options. The first generation was produced from 1977 to 1988 (model series TA, TB, TC, VD, VH), the second generation’s years were 1988-1999 (model series HA1, HA2, HH1, HH2 with the E05A engine; HA3, HA4, HA5, HH3, HH4 with the EN07A engine – the Street continued in production until 2011) and the third generation’s years were 1999-2009 (model series HA6, HA7, HH5, HH6 with E07Z engine) with the van still in production. The fourth generation was introduced, as a truck only, at the 41st Tokyo Motor Show in 2009 on December 17, showing the HA8 series and continuing to use the E07Z engine. Since the merger of the Subaru Sambar and Daihatsu Hijet, the Acty truck has become the only remaining Kei truck not to have a front-engine, rear-wheel-drive layout.
The first Acty trucks were introduced July 27, 1977, and replaced several Kei trucks Honda had previously offered, such as the Honda TN360 (most recently sold as the TN7) and the Honda T360. On 1 September 1975, the Japanese Government revised the rules on Road Trucking Vehicle Law that regulated the dimensions and engine size of vehicles in this class. As a result, the first Acty trucks and vans were available with a “midship” mounted 545 cc 2-cylinder SOHC water-cooled engine, known as the EH engine, which produces 28 PS (20.6 kW) at 5500 rpm and 4.2 kg·m (41 N·m; 30 lb·ft) at 4000 rpm. This was about 50% larger than the engine used in the preceding TN7. Export models, with less emissions equipment, claim 30.6 hp (22.8 kW; 31.0 PS) at the same engine speed.
1983 Acty (second facelift)
The van was introduced November 1979, although a truck-based panel van with a boxy rear was available from the beginning (TB). To save money, the van uses the same taillights as the truck and also has side doors with center mounted handles, meaning that the same pressing can be used for either side of the car. The Acty was exported to a number of markets, including Great Britain, where it is considered to have created an entire new category. The Suzuki Carry/Bedford Rascal was GM’s response to the Acty in the British market.
An upper trim level of the Acty van intended mainly for passenger usage went on sale 1 February 1981 and was called the Honda Street (in Japanese); it was produced for two generations of the Acty van. Available with a standard or an all-new high roof design, the high roof was also made available for the Acty van (SDX only). The name was discontinued in 2001 after the Honda Vamos name had been reintroduced as a replacement trim level for the Street, on a shared platform of the Acty van. In March 1983 the four-wheel drive Acty/Street was added. This model receives 12-inch wheels for increased ground clearance and has an engine with an improved cylinder head, increasing power to 29 PS (21.3 kW) at 5300 rpm and torque to 4.5 kg·m (44 N·m; 33 lb·ft) at 3500 rpm. This was also the first Acty/Street to receive a five-speed manual gearbox, initially only available on the 4WD models. A larger, 35 L (9.2 US gal) was also part of the 4WD’s equipment.
In June 1982 the series received a facelift, with wraparound turn signals. While the Acty has round headlamps, the Street received square units after the facelift. Starting with model year 1985, the Acty/Street was exclusive to a chain of Japanese Honda dealerships established for small and commercial vehicles, called Honda Primo.